Plaid brooches

**Teufel Hunden** · 4th April 11, 02:44 PM

So I wasn't sure where to put this, either historical or traditional...

BUT, I'm looking for a good plaid brooch for my wedding this year. I had originally planned on getting one made for this, which would look awesome, but the high price tag made me rethink it. I'd still like to find something at least fairly unique, but am curious if there's anything I should keep in mind in my searching. For instance, are they ALL round? Do they need to be?

A nice antique or (antique looking) one would be nice, most of the brand new ones I see online just strike me as very uninteresting and common, something my fiancee and I have looked to avoid in the details like this.

Can anyone point me in the right direction for historical pieces, or traditionally acceptable ones that might not look like every other one I've ever seen?

Thanks for the help!

-Sam

**MacLowlife** · 4th April 11, 03:11 PM

Call me crazy, but I suspect you can get a sheet of silver and cut it yourself. (with snips or a fine saw) If you can't attach the pin, get someone to do that, bearing in mind the weight it must hold. Why not start out with a 4 inch square of paper- or a square of former beer can aluminum- and get busy scribbling and doodling. Chances are your bride has some ideas...

If you don't think you can manage building your own, why not consider retrofitting one by inserting or attaching something of personal significance in the center, where the yolk of the fried egg would otherwise reside?

Be sure to show us your process...

**Teufel Hunden** · 4th April 11, 03:19 PM

Originally Posted by MacLowlife

Call me crazy, but I suspect you can get a sheet of silver and cut it yourself. (with snips or a fine saw) If you can't attach the pin, get someone to do that, bearing in mind the weight it must hold. Why not start out with a 4 inch square of paper- or a square of former beer can aluminum- and get busy scribbling and doodling. Chances are your bride has some ideas...

If you don't think you can manage building your own, why not consider retrofitting one by inserting or attaching something of personal significance in the center, where the yolk of the fried egg would otherwise reside?

Be sure to show us your process...

Well, i'm not terribly good with metalworking, Unfortunately. I could make something nice and flat with perhaps some decorations on it, but nothing that would be worthy of a wedding piece.

I'll see about retrofitting one, if I can find a basic one I like.

**CMcG** · 4th April 11, 03:43 PM

What sort of plaid are we talking about and what else are you going to wear with it?

**Teufel Hunden** · 4th April 11, 03:46 PM

Originally Posted by CMcG

What sort of plaid are we talking about and what else are you going to wear with it?

It'll be a fly plaid, MacDonald of the Isles modern hunting, worn with a Montrose Doublet, horsehair sporran, diced hose, and those dreaded ghillies.

**Dale Seago** · 4th April 11, 04:17 PM

I'd recommend doodling around and then getting in touch with Mike McRae at Scotia Metalwork. I have a brooch he made years ago, about 3 inches across in sterling. . .It's a domed solid hexagon with a carnelian in the center, and some nice engraving in the panels around it. Actually looks like a Victorian-era antique.

Oops, actually I don't, my girlfriend has it right now.