face of fabric ??

[filman]

Howdy all

I was wanting to know how one can tell the face of a fabric from the inside.

The reason I ask is I just got a kilt last weak (IRSH DIASPORA)and the stips are to look like the Iish flag but they are backwards. So I called my kilt maker
and told them about it. I was told that I was wrong and the weaver made it this way. Then I asked them to remake my kilt inside out so it looked like the flag the way I wanted it. That was when they said something about the weave and how it would not look right becouse of the way the threads laid.

So can anybody tell me if that is true or if it is hog wash.

[Barb T]

When you're wearing your kilt and you look down at your toes, the twill line of the fabric should run diagonally from right at the top to left at the kilt bottom.

Barb

[filman]

thanks Bard

[Iolaus]

thanks Bard

She's a kilt expert and a bard? Wow, cool!

[Southern Breeze]

She's a kilt expert and a bard? Wow, cool!

Shes also a Piper,multi-talented isn't she?

[GMan]

Don't forget geologist! And we can all call her our friend.

That really is nice to know Barb, as I never noticed it before.

[Pleater]

I did not know that the direction of the twill was significant - I am just remaking my plaid pattern 'pleated to the stripe' kilt I have shrunk out of and rushed to find it and check - great - I've got it the right way out. I'm half way through the pleats, all sewn down.

Having lost 20lb a complete remake seemed the best option as it will mean closer pleats and a better look to the back of the kilt. I am building in some adjustment by skimping the under apron pleat as incentive to continue with the weight loss. I'll only finish of the inside and the waistband once I can make the deeper pleats. I am wearing a belt rather than using buckles on all my kilts, and experimenting with belt loops in various places - two at the back and one on the end of the upper apron being the minimum for safety!!

[way2fractious]

A while back I bought a kilt for cheap on eBay, wondering at the time what might be wrong with it. When it arrived, I discovered that the underapron strap had been pulled so hard that it had ripped out of the buckle. (Musta been one big dude!) No problem to fix that. Other than that, it was a well-made kilt from a commercial clothing house, using a very fine worsted wool tartan. I've had lots of compliments on the kilt - and not a single comment about the twill direction!

It took another month or so for me to check the twill direction. Sure enough, from the selvedge, the diagonals ran from lower left to upper right - backwards. The commercial enterprise had made it inside out. Nonetheless, I wear it as an everyday kilt, and do not hesitate to dress it up, either.

Last Thankgiving I visited the "______ Scottish Imports Shop" in "_(city)_." I happened to scan their racks of kilts for hire, and suddenly became aware that approximately 50% of their stock (Stewarts, Gunn, Gordon, etc.) was made up using the "wrong" side of the fabric. Not wishing to make a pest of myself, I did NOT mention it to the proprietor.

Modern tartans are usually so well-made that the two side are almost indistinguishable but for the twill direction. My bet is that very few people, except those on this board, would notice or care that the "wrong" side of the fabric was used.

Whatever you make and however you make it, wear it with pride, having the satisfaction that you did it yourself. Each trial produces fewer errors. Sew on!

[Pleater]

I thought that was the right way round - from right at the top to left at the bottom acording to our kilt guru Barb - I made a 'rule' - from the outer apron fastener to the left knee, so I'd remember


- hang on though, that is when it is being worn, so if you are looking at the apron of the kilt when it is hanging up then it is top left to lower right which is correct - I think the apron fastener to left knee is safest for those with dyslexia, like me.

The vessel with the pestle has the potion that is poison - the thingy from the whatsit has the brew that is true. Mnemonics do work, even when you don't want them to.

[RockyR]

When you're looking at the face of the fabric (with the width... typically 54 to 60" wide going up and down and the length going right to left), the face will have the lines running like this:

\\\\\\\\\\

The "WRONG" side of the fabric will have the lines going //////// this way.