There have been several threads recently inquiring about fabric weight and kilt-yardage as they relate to hot weather and comfortable kilt-wearing. I've also received several inquiries asking for a little more info about a kilt style that I like to wear. I thought I'd start this thread to share my thoughts on a type of kilt that addresses both these concerns, while maintaining an appearance that is very attractive IMO.

If you're looking for a kilt that is comfortable, durable, traditionally styled, and crafted with excellent skill consider the 6 yard, heavy-weight knife-pleated kilts made by Matt Newsome. I've owned many of Matt's kilts (4yd BP, 5 and 6yd KP) throughout the years, but these have become my hands-down favorites. Here's why:

1. I really think that 16oz fabric is definitely the best for kilts. The fabric holds pleats better and it is more hard-wearing than lighter weight fabrics. Additionally, it is often available in a wider range of tartans than 13oz. fabrics.

2. I believe that 8yds of 16oz fabric is just too much to put in a kilt that will be worn in hot weather. Figuring 2yds for the overapron/underapron leaves roughly 6yds of fabric to squeeze into 1/2 my hip measurement- approx. 21". The result is that the sheer weight of the back of the kilt is a constant tugging presence. I'm convinced that this is one of the main reasons that most kilts that one sees are worn too low. After 3 hours walking around at a highland games, gravity ultimately wins. The 6yd knife-pleated kilt offers a garment that is balanced and comfortable to wear, whether its walking, sitting, or driving in a car.

3. Because these kilts use less fabric, they are less expensive than an 8yd, 16oz handsewn "tank".

4. They still look like a traditional 8yd knife-pleated kilt (which to my mind is a GOOD thing).

5. Matt's service and craftsmanship are excellent. I have yet to be disappointed with one of his kilts.

In my mind, though, the trick to a really great "low-yardage" knife-pleat kilt is making sure that there are enough pleats across the back of it so that it doesn't stand out from other 8-yd kilts, while removing as much excess fabric as possible to make it more comfortable and balanced. To get the "optimum effect' you'll need to take into account two things: 1) your hip measurement and 2) the sett size of the fabric you're using for the kilt.

If you are larger, you will need more total pleats so that the width of each pleat is not too big. If you are pleating to the line (which is what I recommend for low-yardage knife pleat kilts) then the number of pleats in the back will also be a function of the sett size of the tartan, i.e. a smaller sett size will result in more pleats for the same yardage used. An ideal sett size for a knife pleat would be about 6-7 inches.

My favorite kilt of this type is the Carolina tartan 6-yd knife pleat that Matt made for me. It's in heavyweight Dalgliesh fabric, the tartan has a sett size of 8 inches, and has 18 pleats. My hip measurement is about 43". This combination results in a kilt that is very comfortable to wear but would not be picked out of a crowd as looking any different than an 8-yd knife pleated kilt. To me, that's what you're shooting for.

Here are some photos of the kilt so that you can see for yourself: