-
21st September 12, 10:16 AM
#1
Call me frugal, call me cheep
I don't understand why the Sporrans they sell around here are so darned expensive. Like a simple leather one that is even made here in Canada, that reasonable should cost $45-60 with a decent profit margin, are selling for $145. If you put any form of decoration onto the front, then that bumps it up over $175. It's simple leather stitched together. When shoes cost less that actually have some degree of difficulty to make you know there must be something wrong.
I bought a belt. It's a long piece of leather with some holes cut in one end, and 1 strap for adjustment + 3 rivets and some bend metal at the other end. This didn't even include the buckle front... $60. There is at most $3-4 worth of material inside it, and should sell for $15-20. Ouch.
What am I missing?
Matt
-
-
21st September 12, 10:26 AM
#2
I think you're a bit off in your cost analysis of material. Quality leather is considerably more than that per foot. How much leather is used in a belt or sporran (in square feet)? Remember you have to allow for wastage as not every tiny bit is used.
Now remember to add up how many hours it takes to make one. What is the cost of a living wage in Canada?
Now add in the cost of the machinery... the clicker press, the tools, the dies to cut the leather, the industrial sewing machines to sew it, etc.
Now add on top of that the cost of rent, insurance, electric, water, sewer, heat, etc.
Now on top of that, add PROFIT for a company to make (the whole reason companies do what they do).
Buying quality goods made in countries with a higher standard / cost of living will cost you a bit more. If you want a lower cost sporran, there are others out there for $25 made in countries with lower costs of living and from lessor quality materials. Also, depending on which sporran company you buy from, the costs DO range from very low to very high with plenty of decent quality sporrans inbetween your two price points listed. It's up to you to decide which you'd like.
The alternative is to make your own, but be aware of how much time / effort / expense you put into it.
Last edited by RockyR; 21st September 12 at 10:28 AM.
-
-
21st September 12, 10:28 AM
#3
Same discussion has been held regarding cost of kilts, cost of shoes, cost of. . . you name it.
I'd heard this aphorism before, applied to the printing industry, but Riverkilt among others has used it here as well: you can choose any two of the following: price, quality, speed of delivery.
The frugal ones here (and I count myself among them!) wait for sales, watch for private sales, trade what we can do or have for things we can't do or don't have, learn to do it ourselves. . . the opportunities to save on Highland dress are endless.
And *** to Rocky's comments, posted as I typed!
Last edited by sydnie7; 21st September 12 at 10:29 AM.
Proudly Duncan [maternal], MacDonald and MacDaniel [paternal].
-
-
21st September 12, 10:45 AM
#4
I have found that the best thing to do is make your own , Then divide it by the time you spent doing it Plus materials and it would be alot cheaper .
dont buy into the cheaper stuff , due to it is cheaper stuff and materials .
Just make your own -that way it is what you want , and it will be a One of a kind
I made this one for around $ 40.00 for everything
http://www.xmarksthescot.com/forum/f...sporran-75136/
Last edited by Thomas H; 21st September 12 at 10:47 AM.
Pro 3:5 Trust in the LORD with all thine heart; and lean not unto thine own understanding.
-
-
21st September 12, 11:53 AM
#5
It's a mistake to compare the price of a sporran with the price of a pair of shoes. The sporran is likely hand-made where the shoes are made by the millions in a factory with lots of machinery. Even from a company that makes a lot of sporrans, they're still a small-scale operation compared to a shoe manufacturer. A lot of the work is done by hand, by people who aren't working in sweat shops.
My wife does leather work for a living, and once you've spent any time around someone who builds things with their own hands, you quickly come to appreciate why they cost so much. Even the price of a 'simple' belt that's done by hand is going to cost much more than a mass-produced one. And I've never known a leather worker (even the master saddle builder she learned from) who lived comfortably on that. It's not a business you get into to get rich. It's a labour of love.
-
-
21st September 12, 12:56 PM
#6
Originally Posted by Tobus
And I've never known a leather worker (even the master saddle builder she learned from) who lived comfortably on that. It's not a business you get into to get rich. It's a labour of love.
Ain't that the truth!
-
-
21st September 12, 04:49 PM
#7
Ditto *** on Tobus.
Years ago I thought it too expensive to have my living room floor refinished. I did it myself. The overall cost was less but It sure kicked the hell out of me. I wouldn't do that work for any hourly wage. It's tough and grueling. I discovered that the skilled folks really do deserve what they charge.
I would advise you not to look for cheap but get as high a quality as you can afford. Oh, yeah, save , save, save your bucks. Then pull the trigger for the sporran and belt you really want.
Gu dùbhlanach
Coinneach Mac Dhòmhnaill
-
-
21st September 12, 06:29 PM
#8
Here are sporrans which I think are a real value!
This fellow (Billy Lang) sells his wonderful handmade sporrans, made of the highest quality leather, for around $100.
http://www.xmarksthescot.com/forum/f...porrans-72266/
Now, THIS sporran is def overpriced!
http://www.ebay.com/itm/VIVIENNE-WES...item35bff9f34e
Last edited by OC Richard; 21st September 12 at 06:32 PM.
Proud Mountaineer from the Highlands of West Virginia; son of the Revolution and Civil War; first Europeans on the Guyandotte
-
-
21st September 12, 06:51 PM
#9
Being Frugal does not mean being cheap...
Making your own, (take your pick): sgian dubh, sporran, kilt belt, custom fishing rods, custom fishing lures, and the list goes on and on...is exactly that...a labour of love. In some cases it's cheaper than buying them from a commercial manufacturer, (custom fishing lures), in others, much more than even paying a custom shop to do the same thing, (custom fishing rods). The pros: you get exactly what you want, and the satisfaction that you are using something you envisioned and created. The cons: The time it takes to complete the project, and the expense of obtaining the necessary tools to properly complete the project.
As KenB and others have posted, get the best that you can afford; because you will usually never be disappointed with quality.
-
-
22nd September 12, 03:38 AM
#10
If you buy cheap, you buy often - so you can get a good pair of boots for 50 notes, and have dry feet for ten years at least or you spend 10 notes every year for a pair of cheap boots, so spending twice as much - and probably getting wet feet into the bargain. (That is Sam Vimes philosophising on wealth and footwear - Ank-Morpork City Watch, in the Disc world novels by Terry Pratchet)
Remember that when the money is paid over for a product, then the government expects a goodly slice of it - there is nothing more certain than taxes.
Anne the Pleater :ootd:
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks