Jacket conversion with EZ epaulettes and pocket

[MNlad]

The hem at the bottom of the jacket was a replication of the original hem on the jacket, a line of stitching about 1/8 inch in from the edge of the fabric that ran from under the collar, down the front and around the circumference of the jacket. I put it in after hemstitching the outer fabric and reattaching the lining. I thought it was a nice detail.

I may still go back in and try to round off the top inch of the curve from the bottom of the jacket to under the second button. It's still a bit too abrupt a break--looks good from some angles and less so from others. One of the advantages of starting with a 3-button jacket is you have a bit more room to work with than you do with the typical 2-buttom sport coat.

[MNlad]

Much better. I re-curved the top inch of the altered front to better sweep into the existing edge of the jacket. The color match on the photo also better matches the actual jacket color. Now I just have to brush out the flattened fabric from the pressing. Thanks, folks.

[LPF]

I used the same trick for the epaulettes on a black wool jacket I converted but removed the pocket flaps so you don't even notice the pockets.

[WVHighlander]

I think it looks fantastic! Really fantastic. I may have to start trolling around the used stores to see if I can find an old tweed....unfortunately I am a hard size to fit.

[Wil]

Very nice, I need to do this to a Montrose Jacket of mine..... You have inspired me, thanks.

[FatherWilliam57]

Through the various posts here I got a rough idea of what I wanted—a kilt jacket with epaulettes and plain cuffs that could be worn out in public without too much embarrassment.

I should think you succeeded quite admirably! I especially like the fact you left the sleeves plain and the ticket pocket...wonderful touch! Wear it in good health!