X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
USA Kilts website Celtic Croft website Celtic Corner website Houston Kiltmakers

User Tag List

Results 1 to 7 of 7

Hybrid View

  1. #1
    Join Date
    14th July 12
    Location
    St. Paul, Minnesota
    Posts
    963
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    The benefit of the (very sharp) glover's needle is that you don't need to pre-punch your holes, but you WILL end up stabbing yourself eventually.
    BTDT—Got the puncture marks to prove it.

    If you do much of this, you'll also eventually want a stitching pony. A carpenter's vice also works well. It holds your work in place while you stitch.

    If you are using thin leather in addition to the cloth, you can sew it on a sturdy machine, but you will need leather needles. They cut the holes in the leather rather than trying to punch through like a cloth needle. If they're the appropriate size, this lets the thread feed through much easier.

    Good luck.
    " Anything worth doing is worth doing slowly." - Mae West -

  2. #2
    Join Date
    5th April 13
    Location
    Howell, Michigan
    Posts
    572
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I found a video of someone using an old Singer machine with chisel tipped needles. I suspect a "modern" sewing machine, even my wife's 35 year old Kenmore, might not be up to the task for leather thick enough for the gusset. I like the idea of hand sewing them anyway.

    A stitching pony sounds very useful. Maybe I'll avoid sticking myself as much as I already do with a simple needle and upholstery thread. Glover's needles look pretty wicked.

    I also watched a video explaining saddle stitching. Do you cut a stitching groove? With the relatively thin leather for a gusset, it looks like it would remove too much material.

    Thanks again for the advice.

  3. #3
    Join Date
    19th July 11
    Location
    London
    Posts
    61
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Cutting a groove for stitching is generally only done in places where its likely the stitches will take a bit of a beating. So it would be unnecessary inside a sporran or bag gusset. If you're worried about the stitches you can make a crease in the leather which will tighten the fibres and sew along that but more then likely this will be over kill.

  4. #4
    Join Date
    5th April 13
    Location
    Howell, Michigan
    Posts
    572
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Emmet View Post
    Cutting a groove for stitching is generally only done in places where its likely the stitches will take a bit of a beating. So it would be unnecessary inside a sporran or bag gusset. If you're worried about the stitches you can make a crease in the leather which will tighten the fibres and sew along that but more then likely this will be over kill.
    That's logical. Thanks!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0