-
30th June 14, 03:11 PM
#31
Originally Posted by WillowEstate
My ex military Mackenzie Seaforth has only two straps, both on the right side. The inner apron is just held up by the pressure of the top apron.
Do you have any issues with the inner apron moving or dropping when you move/walk/sit? I only ask as I have the opportunity to buy a kilt from an old friend. It belonged to his uncle and I think that it's just how you described.
-
-
30th June 14, 03:15 PM
#32
Originally Posted by Norbo
but I asoom this is as in Zephron Cochrane , if your a Sci-Fi you will now who im talking about He invented warp drive .
Always nice to find another Trekkie out there.
-
-
30th June 14, 03:52 PM
#33
Originally Posted by WillowEstate
And I have to chip in and say it's not always the same two straps! My ex military Mackenzie Seaforth has only two straps, both on the right side. The inner apron is just held up by the pressure of the top apron. I've seen a number of the 22 oz Military kilts like this.
My PV kilt has three - I tried not fastening the left one but that doesn't work - the lesser weight, perhaps or maybe he different friction of the cloth?
All of my personal kilts are made with no fastener on the left side and really like it. PV, wool, canvas, poly/cotton and ripstop, and they all stay put pretty well. I tend to wear mine fairly loose much of the time so I have to give the under apron an occasional tug, but in general it's not a problem. I bet that the unfastened strap on your PV was allowing the fabric to move around more easily, along with not having the same kind of friction that your wool kilt has.
-
-
30th June 14, 03:57 PM
#34
Originally Posted by mookien
To my eyes the tartan in your pic matches exactly the Cochrane tartan as shown at
http://www.tartanregister.gov.uk/tar...e.aspx?ref=695
I see three large green blocks between each set of yellow pin stripes, and also three narrow green blocks (bars) between the red stripes in both "pictures".
If you look at this link at the yellow block and look at the red bands going down the link has 4 red bands including the 1's on the yellow line and my one only has 3 . it has just 1 down the center of the yellow block and the other has 2 .
http://i.ebayimg.com/00/s/MTAwMFg3NT...Tpe05/$_57.JPG
http://www.tartanregister.gov.uk/tar...s.aspx?ref=695
-
-
30th June 14, 04:03 PM
#35
It is my understanding, mostly from Barb's excellent book (The Art of Kiltmaking), that lighter weight fabric is usually used for highland dancing kilts , male or female, and that the third strap is usually used for such kilts, but not really needed for a normal kilt, male or female. ( I stand ready to be corrected. )
All the kilts I have made, so far, have only two straps.
waulk softly and carry a big schtick
-
-
30th June 14, 05:11 PM
#36
Originally Posted by Norbo
I'm not sure we're accounting for it in the same way, but I think I know to what you are referring.
I simply counted the number of times the yellow stripe crossed a red stripe between the intersection of two yellow stripes. In yours and the Cameron of Erracht there are 8 such crossings. In the Cochrane there are 12. So, that would argue for Nathan's assertion that your kilt is a Cameron of Erracht.
There could be other difference(s) in the sett, of course, but I'm not going to try to find any.
I changed my signature. The old one was too ridiculous.
-
The Following User Says 'Aye' to mookien For This Useful Post:
-
30th June 14, 05:18 PM
#37
Natan Easbaig Mac Dhòmhnaill, FSA Scot
Past High Commissioner, Clan Donald Canada
“Yet still the blood is strong, the heart is Highland, And we, in dreams, behold the Hebrides.” - The Canadian Boat Song.
-
-
30th June 14, 05:29 PM
#38
Some military kilts only have one strap/buckle. My Gordons one was like that.
Others have two straps, both for the external apron.
-
The Following User Says 'Aye' to Ron Abbott For This Useful Post:
-
30th June 14, 05:33 PM
#39
...So in conclusion, the strap configuration has nothing to do with whether the kilt is meant for males or females. Men's kilts, both civilian and military come in a wide variety of strap configurations. ;)
Natan Easbaig Mac Dhòmhnaill, FSA Scot
Past High Commissioner, Clan Donald Canada
“Yet still the blood is strong, the heart is Highland, And we, in dreams, behold the Hebrides.” - The Canadian Boat Song.
-
The Following 5 Users say 'Aye' to Nathan For This Useful Post:
-
30th June 14, 06:59 PM
#40
Originally Posted by Father Bill
My hand-sewn professional kilts all are two-strap. The third strap only limits the motion of the garment and if used, usually should not be buckled as tightly as the others.
That's it in a nutshell.
I dislike the 3rd strap because
1) it doesn't accomplish any useful purpose
2) it's an extra thing to do when I get dressed and
3) it 'limits the motion' as the good Father says and puts stress on the front apron, pulling and stretching it, and often making the kilt bunch up on that side.
The exception to all of this are high-waisted Army kilts, the extra strap on the wearer's right not being as low as it is on a low-waisted civilian kilt, as least as far as I can tell.
My band-issued kilts always have three things I find no use for
1) the 3rd strap
2) belt loops and
3) strange loops which presumably allow the kilt to be hung, just how I can't imagine.
I remove the 3rd strap and try to ignore the other two annoyances.
Last edited by OC Richard; 30th June 14 at 07:04 PM.
Proud Mountaineer from the Highlands of West Virginia; son of the Revolution and Civil War; first Europeans on the Guyandotte
-
The Following 2 Users say 'Aye' to OC Richard For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks