X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
USA Kilts website Celtic Croft website Celtic Corner website Houston Kiltmakers

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Deep pleats

  1. #1
    Join Date
    23rd April 15
    Location
    London, ON Canada
    Posts
    110
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Deep pleats

    I am making a weathered MacKenzie kilt and the sett is 12” so to pleat to the sett they will be 6” deep which I’ve never done before, it seems like a lot. I calculated about 17 pleats and I’d still end up with almost 6 yards in the back, don’t know what sort of swing you’d get with pleats like that. I could pleat to the white stripes which would make the pleats only 3” deep which is more manageable and I’ve done that before. Any advice on how to approach this would be greatly appreciated.

  2. #2
    Join Date
    23rd April 15
    Location
    London, ON Canada
    Posts
    110
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Picture didn’t show in first post, here it is

  3. #3
    Join Date
    15th January 19
    Location
    Lake Zurich, Illinois
    Posts
    155
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    I am sure Barb T or another experienced maker will here shortly.
    Usually a 8 yard traditional will have about a yard of fabric dedicated to each apron, over and under. That leaves 6 for the rear pleats. So your total rear fabric sounds ok.
    Are you pleating to the stripe (red/white/alternating), a general block of color, or are you attempting to replicate the pattern?

  4. #4
    Join Date
    7th May 14
    Location
    arizona
    Posts
    178
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    have you tried to pleat it to the sett?
    tact is the ability to tell someone to go the hell in such a way they look forward to the trip Winston Churchill

  5. #5
    Join Date
    7th February 11
    Location
    London, Canada
    Posts
    9,506
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    I note your screen name as a re-enactor. If you're doing a period before 1830, my understanding from others on this forum is that most kilts were box-pleated then, something that uses a lot less fabric, normally pleated to the stripe.
    Rev'd Father Bill White: Mostly retired Parish Priest & former Elementary Headmaster. Lover of God, dogs, most people, joy, tradition, humour & clarity. Legion Padre, theologian, teacher, philosopher, linguist, encourager of hearts & souls & a firm believer in dignity, decency, & duty. A proud Canadian Sinclair.

  6. #6
    Join Date
    15th January 19
    Location
    Lake Zurich, Illinois
    Posts
    155
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    If you are referring to me then I am not the op, just a commenter.

  7. #7
    Join Date
    7th February 11
    Location
    London, Canada
    Posts
    9,506
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by KnittedReenactor View Post
    If you are referring to me then I am not the op, just a commenter.
    Sorry - I need to pay closer attention.
    Rev'd Father Bill White: Mostly retired Parish Priest & former Elementary Headmaster. Lover of God, dogs, most people, joy, tradition, humour & clarity. Legion Padre, theologian, teacher, philosopher, linguist, encourager of hearts & souls & a firm believer in dignity, decency, & duty. A proud Canadian Sinclair.

  8. #8
    Join Date
    30th September 08
    Location
    Cypress, Texas
    Posts
    1,546
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    BertMcG:

    Some years ago, I had a Smith tartan kilt pleated to the red stripe. It's a large sett, and I ended up with 18-19 pleats that are as deep as you'd described. I love the kilt, but it's heavy. It doesn't swing quite as well as other kilts I have with shallower pleats, but it's not bad.

    Curious to see what the kiltmakers will have to say on the subject.

    SM







    Shaun Maxwell
    Vice President & Texas Commissioner
    Clan Maxwell Society

  9. #9
    Join Date
    23rd April 15
    Location
    London, ON Canada
    Posts
    110
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by KnittedReenactor View Post
    Usually a 8 yard traditional will have about a yard of fabric dedicated to each apron, over and under. That leaves 6 for the rear pleats. So your total rear fabric sounds ok.
    I have done a couple with 6 yards in the pleats but they had close to 30 pleats so much more shallow, but this would be pleated to the sett so only 17 wide and deep pleats, I don’t know if that would have the same swing as more and shallower pleats.

  10. #10
    Join Date
    23rd April 15
    Location
    London, ON Canada
    Posts
    110
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by ShaunMaxwell View Post
    BertMcG:

    Some years ago, I had a Smith tartan kilt pleated to the red stripe. It's a large sett, and I ended up with 18-19 pleats that are as deep as you'd described. I love the kilt, but it's heavy. It doesn't swing quite as well as other kilts I have with shallower pleats, but it's not bad.

    Curious to see what the kiltmakers will have to say on the subject.

    SM







    Yes very similar size sett, that’s what I suspected about the swing. Nice looking kilt by the way. I have a Smith kilt as well but opted to pleat to the blue stripe, as I recall I don’t think I had enough fabric to do otherwise.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0