X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
USA Kilts website Celtic Croft website Celtic Corner website Houston Kiltmakers

User Tag List

Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 38
  1. #21
    Join Date
    27th October 09
    Location
    Kerrville, Texas
    Posts
    5,711
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by AmateurKiltsmen View Post
    Yea it’s a claymore with a thistle on the handle, would it be better if I flipped it upside down? Next kilt I’ll probably buy a lightning bolt for.
    Just my opinion, but the problem I have with this style kilt pin is that there's a big gap between the outer body of the pin and the actual pin shaft itself, due to the way the clasp is made. No matter what orientation you pin it to your kilt, the heavy front wants to flop around, since it stands proud of the kilt fabric by the thickness of the clasp tabs. They become a rotation point. And the fact that the front is not flush with the fabric makes it want to catch on things. That's par for the course with most kilt pin designs, even the blanket pin style that I prefer, but at least the blanket pin doesn't have much weight to it.

    Honestly, kilt pins are more trouble than they're worth. I may yet just stop wearing them altogether as I keep trending towards simplification. *shrug*

  2. #22
    Join Date
    13th March 24
    Location
    UK
    Posts
    85
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Tobus View Post
    Just my opinion, but the problem I have with this style kilt pin is that there's a big gap between the outer body of the pin and the actual pin shaft itself, due to the way the clasp is made. No matter what orientation you pin it to your kilt, the heavy front wants to flop around, since it stands proud of the kilt fabric by the thickness of the clasp tabs. They become a rotation point. And the fact that the front is not flush with the fabric makes it want to catch on things. That's par for the course with most kilt pin designs, even the blanket pin style that I prefer, but at least the blanket pin doesn't have much weight to it.

    Honestly, kilt pins are more trouble than they're worth. I may yet just stop wearing them altogether as I keep trending towards simplification. *shrug*
    The only problem is that kilt pins are a big part of the look for me, a kilt without at least pin or sporran doesn’t feel right to me.

  3. #23
    Join Date
    30th May 24
    Location
    Los Angeles area
    Posts
    18
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    When I visited Scotland in the early 70s grouse claw brooches were on sale everywhere. I've always thought they'd make a nice kilt pin.

  4. #24
    Join Date
    30th September 08
    Location
    Cypress, Texas
    Posts
    1,544
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)
    See this thread for some interesting pins:

    https://www.xmarksthescot.com/forum/...lt-pins-64703/

    Cheers,

    SM
    Shaun Maxwell
    Vice President & Texas Commissioner
    Clan Maxwell Society

  5. #25
    Join Date
    18th October 09
    Location
    Orange County California
    Posts
    10,881
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    About big heavy cumbersome kilt pins, it's been a strange modern trend in kilt accessories in general.

    The accessories I own made in the 1930s-1950s period are slender and lightweight.

    The vintage sgian is slim, flat on the back, and lightweight meaning it's comfortable to wear. It doesn't make the sock droop like some of the huge heavy modern sginean do. I've even seen modern sginean with handles made of thick heavy solid pewter.

    The vintage kilt pin is delicate, lays flat, and weights almost nothing. Many modern pins are thick heavy things that weigh down the kilt.

    The vintage sporran is slender and lays flat. Yes it has a gusset so it can hold wallet keys etc just fine. Some modern sporrans are huge thick things like military ammo pouches or something.
    Proud Mountaineer from the Highlands of West Virginia; son of the Revolution and Civil War; first Europeans on the Guyandotte

  6. #26
    Join Date
    18th October 09
    Location
    Orange County California
    Posts
    10,881
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)
    As Steve so clearly explains, even kilts which were made properly and fit the wearer correctly are often worn wrongly, spoiling the look of them.

    The thing I see at every Highland Games are Pipe Band people who have nice handstitched traditional kilts which were made to their measurements, but who wear the kilt far too low.

    They're putting the top of the kilt where the top of modern jeans is, which does two things

    1) make the kilt too low at the bottom, covering their knees.

    2) put the line where the pleat-stitching ends below where the crest of their buttocks is, so that the pleats go inward hugging the underneath of the buttocks. (The point where the stitching should end is hard to describe; imagine a plumb-line going down from waist to knee over the top of one cheek; the point it's no longer laying on the cheek but hanging free to gravity is where the stitching should end.)

    Last edited by OC Richard; 1st June 24 at 05:15 AM.
    Proud Mountaineer from the Highlands of West Virginia; son of the Revolution and Civil War; first Europeans on the Guyandotte

  7. #27
    Join Date
    22nd February 21
    Location
    California
    Posts
    38
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by OC Richard View Post
    The thing I see at every Highland Games are Pipe Band people who have nice handstitched traditional kilts which were made to their measurements, but who wear the kilt far too low.
    Having attended a Scottish fest last weekend, this was in abundance. Men, women, band members, non-band members, didn't matter. No one was showing any knee. The kilt of one younger drummer (teens probably) was so low I could not see the tops of his hose. It literally looked like a dress. I don't know if this is a result of wearing the kilt too low, or taking an incorrect measurement, or just personal preference.

    Another observation was the lack of kilted people. Very few in relation to the large number attending, and many of them were younger guys with a cheap PV or utility kilt, sandals, a "Royal Kilt Inspector" t-shirt and a 20 oz. Bud light in each hand. But that's another thread.

  8. #28
    Join Date
    14th June 21
    Location
    Fettercairn
    Posts
    519
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by AmateurKiltsmen View Post
    The only problem is that kilt pins are a big part of the look for me, a kilt without at least pin or sporran doesn’t feel right to me.
    It's easy to understand your sentiment.

    Kilt-pins are now more about personal choice and taste than anything functional, and there is almost endless option to express this.

    The 'blanket pin' style often gets unfair dismissal, but they tend to lie flat against the kilt in a neat way, and there are a good few options out there. Vintage ones sometimes make their way onto eBay, and you can usually bag a bargain.

    Click image for larger version. 

Name:	DSCF3051a.jpg 
Views:	0 
Size:	271.0 KB 
ID:	43559 Click image for larger version. 

Name:	DSCF9426a.jpg 
Views:	0 
Size:	258.8 KB 
ID:	43560

    This little vintage trio are solid silver, with the army officers' style pin at the top and the presentation one in the middle having a 1915 date. The bottom one is from the 1950s and is still availble from some Highland outfitters.

    The brass is less 'bling' than silver, so suits day-wear and hunting tartans very well, and also goes well with a brass cantle sporran and brass belt-buckle.

    The common but classic oversize (three to four inches long) safety-pin style that often gets supplied with a new kilt is just as good, and comes in nickel (or chrome) and brass finishes.

  9. #29
    Join Date
    13th July 12
    Location
    Western Australia
    Posts
    4
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Egerland View Post
    When I visited Scotland in the early 70s grouse claw brooches were on sale everywhere. I've always thought they'd make a nice kilt pin.
    My late Mum had one ... I'm going to have to hunt for it now!

  10. #30
    Join Date
    6th July 07
    Location
    The Highlands,Scotland.
    Posts
    15,471
    Mentioned
    15 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by ronmack View Post
    My late Mum had one ... I'm going to have to hunt for it now!
    Far be it for me to suggest this, but grouse claw kilt pins are rather "old hat" and not as popular as they were, I am afraid, within certain "conservation groups" these days. If it were me, I think I would choose something else. Just saying.
    " Rules are for the guidance of wise men and the adherence of idle minds and minor tyrants". Field Marshal Lord Slim.

Page 3 of 4 FirstFirst 1234 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0