UPDATE X Marks Kilt Pins

**Buddha** · 6th March 05, 08:47 AM

Originally Posted by Mike n NC

I noticed that also Ham and fixed it. I wore the pin today for the first time. After I put a piece of eraser on the pin I noted the "droop". Another piece of eraser and a pinch of blue tack stuck near the bottom evened it up nicely.

Mike

can you post a pic? I was thinking about pulling the pin off and putting in the center...or maybe 4 straight pin backs in each corner

**Rigged** · 6th March 05, 01:43 PM

I suppose you could solder a second pin below the other. I've seen kits in craft shops.

I'll wrap the clasp with a bit of wire so it doesn't come loose. Otherwise, I like it fine like it is.

**Satirist** · 6th March 05, 04:48 PM

Originally Posted by Kiltedmusiclover

I have posted a photo of the Bronze kilt pin in my
gallery.

Thanks Hank.

I like the color I got, but that looks real nice.

**Hamish** · 6th March 05, 05:21 PM

Originally Posted by Mike n NC

I noticed that also Ham and fixed it. I wore the pin today for the first time. After I put a piece of eraser on the pin I noted the "droop". Another piece of eraser and a pinch of blue tack stuck near the bottom evened it up nicely.

Mike

That's a good idea Mike. I've not had time yet (busy weekend) to think about rectifying this one, but it did cross my mind that a block or pad of something level with the pin and attached to the back would probably do it. I'll be experimenting....

I like my two pins very much, but the bronze ones are something else. Lucky Moderators! :mrgreen: