Sewing Machines

[Southern Breeze]

I've got an old Pfaff 238 industrial sewing machine. So far it's sewn everything I've thrown at it.

[Pleater]

Check the foot control - they can get trodden on and bent - unplug it and try the action in your hands - if it is resisting so that it can't be pressed down just a little and so give a very slow speed try taking it apart and check for bent metal. Putting some grease on the hinge would be a good idea, if it has no lubrication.

If, when you press the pedal there is a buzzing from the motor but the machine does not start to sew then the inside of the machine is probably in need of a clean and oiling.

I find gun oil is very good for sewing machines.

It is not unusual for bits of thread to get caught in the workings under the needle - where the bobbin fits. Do take it apart and brush out fluff and check for thread. Just how often depends on the amount of work it does. If you keep it clean and oiled it will last far longer and work better.

I used to do repairs and servicing of knitting and sewing machines, and often earned the whole fee just by applying a tablespoon full of solvent and maybe ten drops of oil. Well - there was usually a lot of mopping up of dirt and brushing out of foreign object debris as well, but basically the machine wasn't working because it needed to be cleaned.

[HeathBar]

Check the foot control - they can get trodden on and bent - unplug it and try the action in your hands - if it is resisting so that it can't be pressed down just a little and so give a very slow speed try taking it apart and check for bent metal.

The foot pedal works fine. Its just my heavy foot. The longer I'm sewing, the further I press the pedal, and the more the speed increases.
Like when I'm driving, I use pressure from my big toe to accelerate. The foot pedal on the sewing machine, has more resistance so I need to apply more pressure to get it to go. What I would like to do is see if there is something I can use to stop the pedal before I push it too far.
Does that make since?

[Pleater]

Hmm- depending on the physical design of the foot pedal a simple insertion of a block or wedge of wood, or a ball of some kind, to prevent it being depressed beyond a certain point might help to restrict the speed.

I have not experienced a hard to press foot control they are usually very light. Personally I would be investigating why it has so much resistance.

Maybe slowing down and having a lighter touch on the pedal would be a good thing to learn - one day you might be thankful you can get an extra few miles from a tank of petrol.

[Barb T]

I find sewing barefoot or in socks helps a great deal, because you can do more control with your toes when you can actually feel the treadle than you can when you have shoes or boots on.

Barb

[Alan H]

Sailrite.....www.sailrite.com

Makes "consumer sized" but "industrial strength" built sewing machines for sailmaking and canvaswork. The intermediate model comes with a walking foot which is vital for heavy canvas work. If I could justify the $$, I'd be buying one of those, or grabbing an older JUKI off of ebay. For now, I can do everything I need for my "hobby" with the old Singer and the Husky.

[bubba]

The prices on those Sailrite machines isn't bad at all

[UmAnOnion]

Sailrite.....www.sailrite.com

Makes "consumer sized" but "industrial strength" built sewing machines for sailmaking and canvaswork. The intermediate model comes with a walking foot which is vital for heavy canvas work. If I could justify the $$, I'd be buying one of those, or grabbing an older JUKI off of ebay. For now, I can do everything I need for my "hobby" with the old Singer and the Husky.

DAMN YOU ALAN!!!!

i am on the verge of burning out the little Singer that i bough a couple years back & am debating what to do for a replacement & you had to go & post those!!!


AAARRRGGGHHH!!!!!