Damascus, Bayleen, Ivory Sgian Dubh Build

**Blu (Ontario)** · 15th December 06, 09:59 PM

A nice photo series.

In photo #4, you drilled a series of parallel holes for the tang. I was wondering if a mortising cutter might be a bit easier - I think I've seen them as small as 3/16".

Also I'd be interested to know the story behind the blades... very nice by the way.

Nice work!

.

**Panache** · 15th December 06, 10:52 PM

O'Neille,

That is just beautiful! Like everything else you do, it's quality work.

Cheers

**O'Neille** · 16th December 06, 03:37 PM

Originally Posted by Blu (Ontario)

In photo #4, you drilled a series of parallel holes for the tang. I was wondering if a mortising cutter might be a bit easier - I think I've seen them as small as 3/16".

Also I'd be interested to know the story behind the blades...
.

I don't have a lot of wood working tools mostly metal working stuff. I used the drill press because I could remove a lot of material and then finish with a file. The consitency of walrus ivory is closer to brittle metal than wood anyday.

The blades came into existence because I found a guy who could make beautiful Damascus blades and bar stock. We exchanged ideas for a few weeks and finally I was happy with the final design. He went ahead and made up a test batch. It was a lot of work due to the language barrier we had, but the final product turned out wonderful. I ended up with 3 that are fine grained (folded more times) and 4 that are larger grained which I like because of the patterns involved. Getting payment to him and the shipment to me was a lot more work than either designing the blades or making the knives. It should go smoother now that we've worked out the logistics of international manufacturing. The blades traveled the world and ended up in Minnesota before they were forewarded to me. Some problem with a foreign computer keyboard and a little transposition of some numbers.

**Kiltman** · 16th December 06, 04:09 PM

Don't work with metals, but I do appreciate your craftsmanship.

**cgrinder** · 16th December 06, 04:51 PM

Those were very nice. Great work

**beerbecue** · 17th December 06, 11:18 AM

Very nice indeed....

So much nice work done here... too bad these finished items are way, way, way out of my affordability range....

I am more than a little envious......

**sjrapid** · 17th December 06, 02:13 PM

Very nice work, O'Neille. Thanks for sharing the photos with us.

I'm in awe of some of the things members on here can make, and also the level of sophistication of the workshop facilities and tools people have at their disposal.

Best regards