X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
USA Kilts website Celtic Croft website Celtic Corner website Houston Kiltmakers

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    2nd October 04
    Location
    Page/Lake Powell, Arizona USA
    Posts
    14,268
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Field Testing the PV Semi-Traditional

    From time to time I see questions on the board about the polyviscose fabric USA Kilts uses for their kilts. I had the same questions before I tried my first PV kilt. Here's an example of how bulletproof I've found the PV fabric. And, for the record since I bought my first PV kilt from Rocky I now own eleven casuals and three semi-trads with three more semi-trads on order.

    This weekend I only took one kilt with me to visit my girlfriend down in Keams Canyon on the Hopi Reservation. There's a picture of it, the Macdonald semi-traditional PV from USA Kilts, in the photos section under the heading of meeting people while kilted.

    Its a three hour drive from Page, AZ to Keams Canyon. I drove down by way of Hwy 89 through Bitter Springs, Cedar Ridge, and The Gap to Hwy 160 then east to Tuba City where I picked up Hwy 264 through the Hopi Reservation over Third and Second Mesa to Polacca and Keams Canyon.

    Once I got there we went out to dinner at the Hopi Cultural Center and I drove back to Second Mesa, sat in a booth at the restaurant for at least an hour, then drove back to Keams Canyon.

    The next morning I drove home up over Black Mesa. The route isn't on most maps since a lot of it is dirt roads, but it was back to Polacca, up Hopi Route 4 to Low Mountain, then over to Pinon and Navajo route 41 to
    Forest Lakes, through the Black Mesa Coal Mine complex, down the mesa to Black Mesa store and route 160, then west to Mesa View and North on Hwy 98 past Shonto, Inscription, and Kaibeto then home to Page.

    Its a beautiful drive, near therapeutic in its beauty. But I'm sitting on the kilt the whole time.

    I figure I sat on that kilt for at least 8 hours of the 30 hours the trip lasted. When I got home I hung it up. I was amazed to see the pleats weren't wrinkled. There were some wrinkles in the very top front of the apron from my belly 'cause I'm fat.

    This morning when I woke up I noticed the belly wrinkles had hung out without needing to be steamed and I double checked the pleats to see if I'd missed seeing any wrinkles there, I hadn't, still looking good.

    So, I can tell anyone wondering that you can sit in a PV Semi-traditional for eight hours and not worry about getting the pleats wrinkled. And I'm no fuss budget about pleat sweeping. I do it, but its a casual pleat sweep at best. And on the two three-hour drives I stopped twice for one thing or another so the pleats got a few minutes rest and maybe I sat on them different for the next hour.

    Eight hours, no wrinkles. No bull, just fact. Ya see why I buy these great looking PV kilts??

    Ron
    Ol' Macdonald himself, a proud son of Skye and Cape Breton Island
    Lifetime Member STA. Two time winner of Utilikiltarian of the Month.
    "I'll have a kilt please, a nice hand sewn tartan, 16 ounce Strome. Oh, and a sporran on the side, with a strap please."

  2. #2
    Join Date
    27th October 06
    Location
    Snellville, Ga
    Posts
    3,001
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Thanks for the review Ron.... I have also been thinking about a semi-trad from Rocky and Kelly and had these questions.
    "A veteran, whether active duty, retired, national guard or reserve, is someone who, at one point in his life, wrote a blank check made payable to "The United States of America", for an amount of "up to and including my life." That is honor, and there are way too many people in this country who no longer understand it." anon

  3. #3
    Join Date
    10th December 06
    Location
    Toronto, Ontario, Canada
    Posts
    14,351
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Excellent Road test Ron
    I am seriously considering USAK for my next kilt, as I am vertically challenged, and the Stillwater would have to come up to my chest to hit the top of my knee.

  4. #4
    Join Date
    2nd October 04
    Location
    Page/Lake Powell, Arizona USA
    Posts
    14,268
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Aye McMurdo,

    I've the same challenge and sadly, that's why I don't own a SWK, they don't fit me lengthwise.

    Its cool that I can get a custom length in a casual kilt from USA Kilts. Though I have my semi-traditionals cut a tad longer since I wear them higher up than my casuals.

    Ron
    Ol' Macdonald himself, a proud son of Skye and Cape Breton Island
    Lifetime Member STA. Two time winner of Utilikiltarian of the Month.
    "I'll have a kilt please, a nice hand sewn tartan, 16 ounce Strome. Oh, and a sporran on the side, with a strap please."

  5. #5
    Join Date
    10th December 06
    Location
    Toronto, Ontario, Canada
    Posts
    14,351
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    My thinking is that I have the Gunn Modern from A&J Scott, priceless as far as I am concerned. Now I have the Graham of Manteith, from Hector Russell, if I keep going like that it will be ages before I can afford another. I am really starting to think that the USAK might be the way to go, cause I need more kilts,
    I know it sounds like I have a problem but I admit I'm powerless and that's the first step,
    so I think I'll be ok.

  6. #6
    Join Date
    14th December 05
    Location
    Coeur d Alene, ID
    Posts
    4,410
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Great review Ron. I own two semi-trads from Rocky and Kelly - they are fantastic PV kilts - and now that they are expanding their PV tartan range there are even fewer reasons not to buy one!

  7. #7
    Join Date
    14th September 06
    Location
    South Central Missouri
    Posts
    1,625
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    That's great info - thanks! I've been on the fence about a PV kilt (until now).

  8. #8
    Join Date
    2nd October 04
    Location
    Page/Lake Powell, Arizona USA
    Posts
    14,268
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)
    Don't know if this helps McMurdo,

    I buy my kilts for where I'm gonna be wearing them in general.

    At the top of the line, so to speak, are my hand sewn traditional wool kilts.

    Next, for when I wanna look sharp, but might not wanna "risk" the hand sewn, like bouncing around the back roads of the rez, I choose the Semi-trads.

    The teflon coating on the semi-trad is a great back up to my klutziness, or the environment I'll be in.

    Last trip to the Grand Canyon I spilled orange juice on the apron of my Isle of Skye hand sewn wool. Was trying to "drink and drive." Boy was that a fast pull over and clean up. Freaked me out. While I'd chosen the Isle of Skye for pics I normally would have been wearing a PV kilt for such a trip for just that reason....or UK "Scottish jeans."

    Ron
    Ol' Macdonald himself, a proud son of Skye and Cape Breton Island
    Lifetime Member STA. Two time winner of Utilikiltarian of the Month.
    "I'll have a kilt please, a nice hand sewn tartan, 16 ounce Strome. Oh, and a sporran on the side, with a strap please."

  9. #9
    Join Date
    10th December 06
    Location
    Toronto, Ontario, Canada
    Posts
    14,351
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Thanks Ron

    That does make alot of sense to me I will most likely go for the Semi Trad. in a black, or Royal Stewart, to get something from my mom's side of the family, as the Gunn and Graham of Mantieth are both from my dad's side.

  10. #10
    Join Date
    10th December 06
    Location
    SOUTHCENTRAL VA :)
    Posts
    1,157
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Thumbs up

    I agree with RverKilt....I now own a USAK SemiTrad (Clark Tartan) with 3 on the way....( 1 is for my dad) . I also own 26 handsewn Kilts (10 I cant wear because I wore them when I was a wee one but will pass on to my kids when i have them) But I now wear the PV semi-trad all the time , the teflon coating makes them practically bulletproof . Infact Rocky and Kelly's workmanship and attention to detail rivals some of my Scottish Handsewn Kilts. I HIGHLY recommend the PV semitrad (or casual) for the warm weather or when you feel wearing the Tank isn't practical. I have even worm my PV with my PC to a wedding and no one was the wiser. Again I highly recommend them to ALL.
    HERMAN, Adventurer, BBQ guru, student of history

Page 1 of 2 12 LastLast

Similar Threads

  1. Field Testing the USA Kilt Casual
    By Riverkilt in forum USA Kilts
    Replies: 1
    Last Post: 1st May 06, 03:22 AM
  2. New USAK Semi-traditional
    By Macman in forum USA Kilts
    Replies: 9
    Last Post: 7th January 06, 07:51 PM
  3. Replies: 3
    Last Post: 20th November 05, 06:34 PM
  4. USA semi traditional
    By bubba in forum USA Kilts
    Replies: 6
    Last Post: 1st June 05, 08:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0