Kilt Pattern?

[The Wizard of BC]

And Please, please, wash your fabric first. At least a dozen times through a hot wash/ warm rinse cycle. With Blue Jeans Denim the warp and weft threads are different and shrink at different rates. If you do not pre-shrink your fabric you WILL end up with a pretty, blue, ballet tu-tu.
Each stitch line must be done with 100% Polyester thread too. Look at the side seam of a pair of blue jeans. See that puckering. that is what each line of stitching will look like very soon if you don't pre-shrink and iron each pleat every time you wash the kilt.
Can you tell I'm not a fan of Denim for kilts? Especially self-made ones. Everyone thinks that a kilt made from denim will feel like a well lived in pair of blue jeans when the exact opposite is true. Most denim kilts feel stiff and rigid. Cotton wrinkles, a lot, and must be ironed to retain the crisp edge to the pleats. You don't have legs inside tubes to force the fabric into a shape so must do it with an iron.
Only after repeated washings does denim start to soften enough to hang on it's own.

[Tartan Hiker]

What everyone else said.....I don't like to make anything out of denim and the X-kilt instruction manual is great for a quick contempo kilt, but use cotton/poly twill.

[bunchdescendant]

And Please, please, wash your fabric first. At least a dozen times through a hot wash/ warm rinse cycle. With Blue Jeans Denim the warp and weft threads are different and shrink at different rates. If you do not pre-shrink your fabric you WILL end up with a pretty, blue, ballet tu-tu.
Each stitch line must be done with 100% Polyester thread too. Look at the side seam of a pair of blue jeans. See that puckering. that is what each line of stitching will look like very soon if you don't pre-shrink and iron each pleat every time you wash the kilt.
Can you tell I'm not a fan of Denim for kilts? Especially self-made ones. Everyone thinks that a kilt made from denim will feel like a well lived in pair of blue jeans when the exact opposite is true. Most denim kilts feel stiff and rigid. Cotton wrinkles, a lot, and must be ironed to retain the crisp edge to the pleats. You don't have legs inside tubes to force the fabric into a shape so must do it with an iron.
Only after repeated washings does denim start to soften enough to hang on it's own.

What he said!

but is a dozen times really enough? Maybe use a cement mixer with some sump rock for an all afternoon ride. Should be a little softer by then.

Link to Alan's instructions:

http://www.modelautoracing.com/kilt/X-Kilt_final2.pdf

I feel bad about not putting the link in originally-I'm hosting them for Alan! Oops!

Ray

[sjrapid]

And Please, please, wash your fabric first. At least a dozen times through a hot wash/ warm rinse cycle. With Blue Jeans Denim the warp and weft threads are different and shrink at different rates. If you do not pre-shrink your fabric you WILL end up with a pretty, blue, ballet tu-tu.

Steve is so right - yes indeedy! And to qupte Alan H elsewhere, 'shrink the dickens out of it...' before you start sewing.

Best regards