Physiometrics and standard lengths

[Tim Little]

Tim I just recieved a SWK Standard Weathered Mackenzie last week a made the adjustment to the length no problem.
There is a thin red line allmost four inches from the bottom that is red running over the other colors,so this is what i did.
From the inside,I turned the material under two inches to where it just barely covers the red line inside an pressed it all the way around.
Then I machine stitched through the red line on the outside( Using red thread that matched of course),and you cannot tell at all where the stitch is.
Turned out about 22 and a half inches long in length.

Cant do this on my other Mackenzie because the stitching would show in the white stripe.Been thinking of trying to hand sew it on the inside.

Great tip; thanks!