Too much snow and too much time not throwing will make a fellow undertake interesting hobbies.

I wanted to mash together some cheap but reasonably effective throwing implements so here's what I came up with:








The hammer is a piece of 3/4 inch plastic conduit with a collar at the bottom.

The WFD and WOB's are 1/2 threaded pipe--one is 10 inces and the other is 12 inches with a floor flange attached at the base and my high-tech handle it a half inch "T" with rope threaded through it.

The work well albeit a bit wonkier than a traditonal weight, but for me its ok for training to have to 'muscle' them a bit more.

I already had the plate weights so the entire set-up cost me under $25.00