Measurement question

**Woodsheal** · 28th March 10, 06:28 PM

hello!

On this page under "length" are you asking for TOTAL length of the kilt, or the length from hipbone BEFORE a rise is added? If the latter, it looks like the minimum kilt length one could arrive at is 23.5 inches, which would be 1.5" too long for me:

http://www.burnetts-struth.com/produ...oducts_id=1222

**xman** · 28th March 10, 06:42 PM

That could only be true if you're measuring from your hip bone to kneecap as 20.5". If you're like me and take that measurement as 22" then you're in under the wire.

**Woodsheal** · 29th March 10, 03:53 AM

The minimum length you can click on is 22"; the minimum rise 1.5" - for a total of 23.5"
All of my kilts have a TOTAL length of 22" See my problem...?

**James C** · 29th March 10, 05:06 AM

Hello woodsheal.

We are working on adding shorter measurements to all the kilts. Thank you for letting us know about this problem it will be resolved by the end of the week. If you don't see your exact measurement in the future just make note of it during checkout in the order comments. As kilts are made to measure we want to make sure we have your exact measurements.

Again we will resolve this issue on all kilts by the end of the week. Sorry for the inconvenience.

**Woodsheal** · 29th March 10, 03:49 PM

Thanks for the attention and help!

**tyger** · 30th March 10, 06:55 AM

B&S- make sure that- while you are making changes- you reconcile the 3 measurements that were on your *.pdf file with the 2 measurements that you specify on your webpage.

Anybody with uncertainty about measurements should call and talk with B&S; I didn't.

**Woodsheal** · 2nd April 10, 01:52 PM

The shorter length choices have been added. Thanks...!

**James C** · 7th April 10, 06:25 AM

Originally Posted by tyger

B&S- make sure that- while you are making changes- you reconcile the 3 measurements that were on your *.pdf file with the 2 measurements that you specify on your webpage.

Anybody with uncertainty about measurements should call and talk with B&S; I didn't.

We have updated to specify the length is

on the Measuring form and then also Hip size is noted as (C) the Seat.

If you have any problem measuring please contact us. Its important to get these right to ensure the perfect fit.