I recently bought some leather from the Tandy leather Factory, to try my hand at some leather work. I finally managed to whip something up.

My first little test was to try to make a braided strip of three pieces of leather. It was easier then I thought. When it’s wet it acts like soft spaghetti, but when it dries it hardens right back up. Looked pretty good too.


http://img23.imageshack.us/img23/3569/201602.jpg
braid

My next project was one of those leather wrist bands. It seemed simple enough. I cut the leather into a square strip, than with my handy leather puncher I made all the little holes id need to sew on the accent strip in the center and the coiled boarder. The snaps were the hardest part. They were designed for cloth, so I had to really soak the leather, than pound in the parts to make them snap. I broke one or two of them before I got the hang of it, but in the end it snaps together nice and tight.

http://img515.imageshack.us/img515/38/201415.jpg
Front view

http://img237.imageshack.us/img237/4171/201447.jpg
back view

http://img214.imageshack.us/img214/3063/201712.jpg
Comparison between the one I made, and a cheap store bought one

http://img194.imageshack.us/img194/6571/201812.jpg
On Wrist

Last, though not leather related, I have had these two deer horns in my possession since this spring. You cant walk anywhere in the woods without coming across them when they start to shed them. I just cant for the life of me figure out what I’m going to do with them.
http://img33.imageshack.us/img33/6132/201928.jpg
Horns