Here are a couple hints which can make purlling a fringe just a bit easier.
I pull fringe using a wire bristle dog brush. I pull between 4 and 6 inches.
Then with two forceps I put the number of yarns for each half of the twist in the jaws and with your fingertips twist each 12-15 turns in the same direction.
Then just drop both forceps together over the edge of your table and they will spin together putting the twist into the fringe.
A simple overhand knot finishes off the purl.
If you don't have a source for forceps you could also find one of these fringe twisters which work the same way.
Bookmarks