sgian dubh

[Joe Gondek]

I finished the muzzle loading rifle I was building for a friend and had some bench time and a blade blank and antler so..........

blade is high carbon from sheffield




I used a thick piece of Elk antler tip then thinned it out on the sides to make it ride on leg better


inlaid a pewter button to match the pewter bolster


Now all I have to do is find a home for it.

[Ryan Ross]

Absolutely beautiful work, sir. I especially like the way you've made the sheath to come up to where the hilt will sit proud of the hose. Very functional, as well as good looking!

[Lyle1]

Yes, beautiful work, indeed, and the sheath, also.

[Dall_Piobaire]

Bery nice! I could find it a home!!!!

[McMurdo]

I finished the muzzle loading rifle I was building for a friend and had some bench time and a blade blank and antler so..........

blade is high carbon from sheffield




I used a thick piece of Elk antler tip then thinned it out on the sides to make it ride on leg better


inlaid a pewter button to match the pewter bolster


Now all I have to do is find a home for it.

Joe I fixed your photo links, lovely sgian dubh you have there. If I had not recently bought one of the Bullman Studios sgians from the STM I'd be all over this one great work.

[Joe Gondek]

Thanks McMurdo for fixing the picture links
I figured out what I did wrong and fixed
My connection was acting up when I posted\and left out this picture of it in the sheath



Also thanks everyone for the kind words

the antler on this sgian really fits the hand nicely

[RB51]

Very nice work. If I might ask, where did you get the bolster from?

Laurie

[Joe Gondek]

Very nice work. If I might ask, where did you get the bolster from?

I poured it in place

check out this link for instructions on how I do it

http://www.xmarksthescot.com/forum/p...x.html?t=30994

[MacKay71]

Nice!

[NewGuise]

You should have no problem finding a home for that fine piece of work. I'd be happy to send you my address...